1.- Download and write Retropie image

Download Retropie from https://retropie.org.uk/download .

Then use a card reader to rewrite our SD card using a tool such as Win32 Disk Imager .

2.- Install and update emulators

Install extra emulators at the Retropie main menu

Update all the packages

3.- Install Joystick driver

Install Joystick driver:
– Go to RetroPie setup menu
– Manage packages
– Manage driver packages
– Select option “817 mkarcadejoystick” and install

4.- Customize mkarcadejoystick driver

Edit the driver configuration:
– Connect a keyboard
– Exit to Emulation Station with F4 or via menu
– type: sudo nano /etc/modprobe.d/mk_arcade_joystick_rpi.conf and then ENTER
– modify the line inside to: options mk_arcade_joystick_rpi map=5 gpio=2,3,4,17,9,10,22,27,11,24,23,25
– exit saving changes by pressing CTRL+X on the keyboard, then press Y and then ENTER

5.- Install the driver for the rest of the buttons

Install retrogame driver by following the instructions at https://learn.adafruit.com/retro-gaming-with-raspberry-pi/adding-controls-software

The steps are:
– Connect a keyboard
– Exit to Emulation Station with F4 or via menu
– type curl -O https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/retrogame.sh
– type sudo bash retrogame.sh
– choose option 3 in the menu shown
– edit the config file typing sudo nano /boot/retrogame.cfg
– edit the file so it only contains these 3 buttons:
ESC 8 # Esc key
F1 7 #PAUSE
5 18 #COIN

– exit saving changes by pressing CTRL+X on the keyboard, then press Y and then ENTER

6.- Configure the emulators

configure the emulators to exit with ESC key and pause with F1. Configure MAME to insert coin for player 1 and 2 with ‘5’ key

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies